1st Year Chemistry Chapter 02 Liquids, Solids, Gases MCQs Quiz Test

 If you are looking MCQs for 1st year Chapter Two "Liquids, Solids, Gases" MCQs Question Answers with solutions you are here on right website. On this Page you will learn Chapter Two objective type solved Questions with solutions. All of these chapter wise first Year Chemistry question answers are helpful for upcoming exams and tests preparations. These MCQs are also helpful for entry tests.

Chemistry MCQs Quiz Test
First Year Chemistry Chapter Two Liquids Solids and Gases MCQs Quiz Test

You will learn in this Chapter:

  • Properties of Solid, Liquid, and Gas
  • Boyle’s and Charles’s Law
  • General Gas Equation
  • Avogadro’s Law
  • Dalton’s law of Partial Pressure/Applications
  • Diffusion and Effusion
  • Kinetic Molecular Theory of Gases
  • Evaporation
  • Boiling
  • Structure of Crystalline Solid

First Year Chemistry Chapter Two Liquids, Solids, Gases MCQs Quiz Test

Q.1:The number of molecules in 0.0112m3 of methane at 25°C and pressure of 760mm Hg is:?
  1. 6.02 x 1020
  2. 3.01 x 1012
  3. 6.02 x 1023
  4. 3.01 x 1023
D
Q.2: Which of the following will have the same number of molecules at STP:?
  1. 280 cm3 of CO2 and 280 cm3 of N2O
  2. 44g of CO2 and 11.2 dm3 CO
  3. 11.2 dm3 of O2 and 32g of O2
  4. 28g of N2 and 5.6 dm3 of oxygen
A
Q.3: The partial pressure of oxygen in the lungs is:?
  1. 159 torr
  2. 116 torr
  3. 760 torr
  4. 50 torr
A
Q.4: Gases deviate from ideal behavior at high pressure. Which of the following is correct for non-ideality:?
  1. At high pressure, the gas molecules move in one direction only
  2. At high pressure, the collision between the gas molecules are increased manifold
  3. At high pressure, the volume of the gas becomes insignificant
  4. At high pressure, the intermolecular attractions become significant
D
Q.5: Evaporation is designated as a cooling process because of the reason:?
  1. It is a surface phenomenon
  2. It involves heat absorption
  3. High energy molecules leave behind the low energy molecules and cause cooling
  4. All of the above
C
Q.6: Evaporating water depends upon the following:?
  1. Surface area and intermolecular forces
  2. Speed of the air above the liquid surface
  3. Humidity in air
  4. All of these
D
Q.7: The vapor pressure of a liquid depends upon the following:?
  1. Surface area and temperature only
  2. The volume of the liquid
  3. The humidity of the liquid in the air
  4. Temperature and the intermolecular forces
D
Q.8: At 1atm pressure, a liquid 1 has the boiling point less than a liquid 2, what can we predict about both the liquids:?
  1. Liquid 1 has high vapor pressure than the liquid 2
  2. Liquid 1 has the weak intermolecular forces of attraction than the liquid 2
  3. Liquid 1 is more volatile than the liquid 2
  4. All of the above
D
Q.9: The strength of hydrogen bonding is:?
  1. 20 times less than a covalent bond
  2. 20 times more than a covalent bond
  3. 20 times less than an ionic bond
  4. 20 times more than an ionic bond
A
Q.10: 110°C boiling water of water corresponds to the external pressure:?
  1. Between 760 to 1200 torr
  2. 765 torr
  3. Between 200 to 760 torr
  4. Any value of pressure
A
Q.11: Lower alcohols in spite of being organic are soluble in water because:?
  1. Intermolecular hydrogen bonding
  2. Dipole induced dipoles
  3. The low electronegativity difference between C and H
  4. All of the above
A
Q.12: Ammonia shows the maximum boiling point among the hydrides of the 5th group because:?
  1. Lone pair of electrons present on the nitrogen
  2. The very small size of nitrogen
  3. The pyramidal structure of ammonia
  4. The enhanced electro-negativity character of nitrogen
D
Q.13: Ice float on the liquid water because:?
  1. The density of water is maximum at 4°C
  2. Water freezes at 0°C and is less dense than liquid water
  3. Ice occupies less volume than water at 0°C
  4. Both b and c
B
Q.14: Type of hybridization in diamond:?
  1. sp
  2. sp2
  3. sp3
  4. No hybridization
B
Q.15: The overall structure of the diamond looks:?
  1. Face centered cubic
  2. Square planner
  3. Tetragonal
  4. None of the above
A
Q.16: The graph between pressure and the inverse of volume at constant temperature and number of moles:?
  1. Straight-line parallel to the x-axis
  2. Straight-line parallel to the y-axis
  3. Straight-line passing through the origin
  4. None of them
C
Q.17: If both temperature and volume of a gas are doubled, the pressure:?
  1. Cannot be predicated
  2. Remain unchanged
  3. Is reduce to ½
  4. Is doubled
C
Q.18: In a closed vessel of 1000 cm3, H2 gas is heated from 27°C to 127°C. Which statement is not correct??
  1. The rate of collision increases
  2. The pressure of gas increases
  3. The energy of gas molecules increases
  4. The number of moles of gas increases
D
Q.19: Which one is the form of a general gas equation??
  1. PV = nRT
  2. P1V1/T1 = P2V2/T2
  3. PV = RT
  4. All of these
D
Q.20: The sudden expansion of the gas from high pressure towards the low-pressure causes??
  1. Increase of temperature
  2. Decrease in temperature
  3. Greater number of confusions among the molecules
  4. Decrease of velocities of gas molecules
B
Q.21: The molecules of gas show more deviation from ideal behavior at low temperature, because;?
  1. Kinetic energies
  2. Densities of the gases increase
  3. Collision become less frequent
  4. Attractive force dominate at low temperature
D
Q.22: Hydrogen bonding is extensively present in protein which forms the spiral. The hydrogen bond being produced is between.?
  1. Nitrogen and the hydrogen atom
  2. Carbon and the hydrogen atom
  3. Oxygen and the hydrogen atom
  4. All of these possible
C
Q.23: Ice occupies more space than liquid water:?
  1. 10%
  2. 11%
  3. 12%
  4. 9%
D
Q.24: The boiling point of H2O is 100°C while that of C2H5OH is 78.5°C. The reason is that:?
  1. H2O molecules are small-sized
  2. The bond angles at the oxygen atom are different
  3. C2H5 group is electron-donating
  4. The number of hydrogen bonds per H2O molecule is greater than C2H5-OH
D
Q.25: The distillation of a solution under reduced pressure is called??
  1. Fractional distillation
  2. Destructive distillation
  3. Distillation
  4. Vacuum distillation
D
Q.26: Which of the liquid has the lowest vapor pressure??
  1. Br2
  2. H2O
  3. Ether
  4. C2H5 – OH
B
Q.27: The boiling point of a compound is mostly raised by:?
  1. Dipole induced dipole interaction
  2. London dispersion forces
  3. Intermolecular hydrogen bonding
  4. Intramolecular Hydrogen bonding
C
Q.28: The number of CI ions per unit cell of NaCl are:?
  1. 6
  2. 4
  3. 2
  4. 8
B
Q.29: The crystal of diamond is:?
  1. Ionic
  2. Molecular
  3. Covalent
  4. Metallic
C
Q.30: The crystals formed due to London forces of interaction are:?
  1. Ionic
  2. Covalent
  3. Molecular
  4. Metallic
C
Q.31: Which one is false for evaporation:?
  1. Surface phenomenon
  2. Continous
  3. Exothermic
  4. Cause Cooling
C
Q.32: The forces which are present between the ions and water molecules are known as:?
  1. Dipole induced dipole forces
  2. Ion dipole forces
  3. Dipole-Dipole forces
  4. London dispersion forces
B
Q.33: The conversion of vapours back into their liquid state is called______.?
  1. Crystallization
  2. Evaporation
  3. Vapourization
  4. Condensation
D
Q.34: The attractive forces between the partially positive end of one molecule and partial negative end of other molecules are called:?
  1. Dipole-Dipole forces
  2. Ion Dipole-Dipole forces
  3. London dispersion forces
  4. Debye forces
A
Q.35: Which substance shows anisotropic behaviour in electrical conductivity??
  1. Diamond
  2. Graphite
  3. KCl
  4. Ice
B
Q.36: Molar heat of vaporization of water is:?
  1. 40.7 kJ/mole
  2. 40.7 J/mole
  3. 40.7 cal/mole
  4. 40.7 kcal/mole
A
Q.37: Ice is _____ crystal.?
  1. Metallic
  2. Molecular
  3. Covalent
  4. Ionic
B
Q.38: The number of amino acid units for each turn of helix, on average are:?
  1. 21
  2. 23
  3. 25
  4. 27
D
Q.39: Which solids does not contain covalent bonds??
  1. Copper
  2. Diamond
  3. Graphite
  4. Ice
A
Q.40: Plastics are amorphous solids and:?
  1. Have sharp melting points
  2. Undergo clean cleavage when cut with knife
  3. Do not undergo clean cleavage
  4. Possess oderly arrangement over long distances
C
Previous Post
Next Post
Related Posts

Advertisement